Silica Material Portfolio
Compare crystalline silica powder, fused silica powder and sand, cristobalite, ultrafine silica and surface-treated silica for industrial applications.
PRODUCT FAMILIES
Start with the material family that matches your process, then compare grades, particle sizes, properties and applications.
Crystalline silica powders for coatings, silicone rubber and electronic packaging.
Low-expansion fused silica powders, sand and granules for casting, refractory and ceramics.
High-whiteness cristobalite flour, powder and sand for casting, coatings and engineered compounds.
Clean quartz raw material and refined particles for purity-sensitive industrial applications.
Refined translucent and porcelain-white quartz sand grades for casting, ceramics and refractory uses.
Precision quartz rods, plates and engineered quartz components for technical applications.
Amorphous glass powder filler for zero-crystalline-silica building-panel development. Specify sieve residue, color and moisture for your resin formulation; confirm phase content in the final slab.
Amorphous glass sand aggregate for low-crystalline-silica slab development. Compare fine and mid-size cuts for grain pattern, grading and resin wet-out; agree application-specific acceptance limits.
Amorphous fused silica powder for reformulating engineered stone toward low or zero crystalline silica. Historical qualitative XRD supports phase identification; qualify current lots and slabs.
Amorphous fused quartz sand for resin-bound mineral slabs and low-crystalline-silica building-material development. Discuss fine, medium and coarse fractions, color targets and current-lot phase data.
Cristobalite powder candidate for acrylic mineral-cast sink and basin trials. Confirm lot phase, PSD and treatment, then qualify flow and surface properties in the complete part.
Cristobalite powder candidate for graphite–silicone PTC research. Verify phase and lot PSD, then measure resistance and repeatability in the buyer's complete compounded coupon.
Fused silica powder candidate for microwave epoxy substrate trials. Compare lot PSD, phase and chemistry, then measure dielectric loss in the buyer's cured coupon and RF band.
Amorphous fused silica powder candidate for injection-molded ceramic core trials. Match phase, PSD and lot chemistry to molding, firing, heat exposure and core removal.
Fine natural quartz powder for GFRP floor-panel formulation trials. Compare resin wet-out, wear and strength with lot-specific PSD and chemistry; performance depends on the full laminate.
Washed and graded quartz sand aggregates for engineered stone slabs, offered in controlled size windows for packing, texture and surface design.
High-whiteness cristobalite filler for engineered quartz slabs, supplied in controlled mesh grades with low moisture and application-focused quality documentation.
Amorphous fused silica powder for battery-ceramic kiln setter development, supporting low-expansion, clean-firing and thermal-cycle screening in fixture and support formulations.
Technical Resources
Use practical guides to compare silica materials, convert mesh to microns and prepare clearer specifications for your application and RFQ.
Trace bubbles in quartz-filled polyurethane by separating water-related gas from mixing air. Check sampling, treatment compatibility and controlled casting trials.
Evaluate cristobalite-filled silicone seals with controlled compression, cure history and recovery measurements. Hardness alone cannot qualify seal behavior.
Check silica-filled epoxy cure by separating filler dilution from reaction changes, then connect DSC evidence to the temperature history of the cast part.
